Women Owned* Small Business For more information call (509) 796-2599
Or FAX your requests for information or quotations to: 509 796-2599 tone activated fax
CONSTRUCTION QUESTIONS until ONLINE INTERACTION is available is via fax.

Laboratory Interiors Products List:

• Laboratory Cabinets

1. Factory Built - Chemical and Corrosion Resistant laminated Industrial boards and plywoods
2. Custom Fabrication - safety stations - lab bench units - storage units
3. Contract Fabrications
4. Special Laminates Chemguard - Tough Surf - Arborite - Phenolic
5. Special Coatings for lab cabinets
6. Polypropylene cabinets and hoods - Polyethylene liners
7. PVC - Fabrications
8. Nitric Acid Or Sulfuric liners and pans

Laboratory Casework ( Base Units- 1 2 3 4 5 6 7

Wall Units 1 2 , Tall Stotage Wall Units 1 2

& Lockers & bench sets & boot racks

• Laboratory Counters 3/4 inch 1 inch or 1 1/8 inch thickeness material

1. Epoxy - Trespa - New Plastics including anti-static - phenolics
2. Non Conductive Metal - galvanneal
3. Stainless steel 304 or chemical resistant lab grade 316 - GA 12, 18, & some 20 GA items
4. Coated stone - Imperial Stone - Welded Fiber - Marble slab tops
5. Solids - Composite - thermoformed - preformed
6. setting reinforced -
7. Vinylester - wood surfaces - melimine - laminate - metals
8. Accessories : Sinks , Tanks, Troughs, and Scientific Piping and filtration
9. Dilution/Neutralization tanks - Catchpots, P-traps, PP, & Scientific Plastic sinks

• Refurbishing Kits Patch - Repair & Recoat & Encapsulated (If you have asbestos, there are safe options; call for details. 509 796-2599)

Laboratory Tops Performance Issues(Countertops and other work surfaces) Selection must be based on use as no material is good in all applications.

Laboratory Sinks..(Standard , Custom design,)

Laboratory Faucets

Bottle Washers

• Balance Tables

1. Epoxy -
2. Marble -
3. Cement -
4. Coated Chemsurf
5. Vibration Pads

• Flammable & Acid Storage Cabinets

1. Vapor Adsorbent Cartridges
2. Self - Closing Kits
3. Signs
4. Explosion-proof Fans
5. Polypropylene Acid & HDPE Cabinets
6. Fire Extinguishers
7. Showers
8. Eyewash Stations
9. Safety Racks

• Fume Hoods

1. Acid - (Stainless Steel & PVC) -
2. Dual Entry -
3. Walk- ins
4. Laminair Flow Hoods
5. Canopy Hoods
6. Table Top units
7. Sheilds & Accessories
8. Scrubbers
9. Fans / Blowers & Ducting ( PVC ; FRP; Access.)
10. Process Stations - PVC , CPVC, PVDF, Polypropylene
11. Conventional Hoods : By-Pass, Add Air, Thin Wall, Special
12. Biosafty: Horizontal ,
13. Vertical Flow Units
14. Special containment - Germfree Products - First Response Containment

• Cleanroom Systems

• Clean Air Products

1. Modular
2. Ceiling Filters
3. Curtains; Tunnel;Showers
4. Flow Bench Units
5. Consoles - Cleanroom Furniture & Access. & Custom Fabrications

• Enviromental Rooms & Accessories

• Laboratory Equipment & Accessories

1. Fixtures - Faucet Manufacturers Chicago, T &:S, Watersaver, Wolverine
2. Fans: PVC, Fiberglass, Steel coated
3. Chairs & Stools
4. Incubators
5. Ovens
6. Refrigerators & Freezers
7. Lab Washers
8. Glass washers
9. Bottle Washers
10. Biohazard Hoods & Safety Cabinets
11. Water Filters
12. Water Sytems: Purification, UV, tubing, pipe, ultra pure
13. Deionization
14. Filtration Tanks and accessories including pumps
15. Distillaation
16. Reverse Osmosis
17. Sterilization
18. Cylinder Storing and securing straps and chains
19. Cage Washers
20. Autoclaves
21. Steam glass washers and dryers and drying cabinets
22. Pesticide Storage, special vaults, narcotic storage, pass-thru units

LaboratoryEquipment & Other Accessories & Supplies

See Images Files Below for some Examples:

sample sinks

Back

Sample Library

Vitual Show room

Best Practices, Associations, Trade Organizations, Compliance & Code will be added here. First look to Governmental Hygenists - Best Recommended Practices, then FDA, USDA and other agencies applicable to your lab, then for lab furniture their trade groups. here is a linke to Scientific Equipment & Furniture Association best information: http://www.sefalabfurn.com/forms/Sefa-8.pdf There are other documents, but by requiring the following "compliance with recommended SEFA practices and their installation methods" it will provide you with some teeth if you should need to apply pressure to achieve compliance or correct problems. However, the fact that it is identified as a laboratory project puts some of this upon the bidder whether or not the bidder or supplier understand the implications of bidding on a laboratory project. I would also ask, why not taking a project as a design-build and acts as the contracting firm, contract with others if your firm does not have the capability to be the manager, but this will provide more control of quality and end result. We have been involved with several very successful owner(partnering) projects. It helps to have everything in writing and use a simple partnering agreement and determine change order issues and markup and labor cost. A budget and then a time and material job (T/M) can be good for you and the trades doing the actual work. BE SURE YOU CHECK MANY REFERENCES AND PULL A RECORDS CHECK BEFORE DOING THIS WITH ANY FIRM.

Product Technical Consulting - developement, and problem resolution with quality issues, using technologies to improve, combine or create new composition.

Owner Advocate Services - includes identification of not in compliance issues, not to industry standards and functional issues, some quality standard issues, performance limitations, options to resolve of in place or substandard issues. Also, cost saving and shifting of error back upon the parties which were in control of outcome or problems.

Creating a Lab

Contact Us for more information 509 796-2599

/P>

Remember who we are is what we do. We do labs and experience does count in everything.

Created by Laurie & Barbara Nov2002