Laboray Wall Case Sizes Selection List
Laboratory Cabinet Wall Storage Cupboards

Select material and construction features based on use.
Determine if your wall cases will be with doors or open without doors.
We find most labs match uppers with the base cabinet construction features and material.

If you selected metal base cabinets then select wall cases of the same material.
Metal can be powder coated steel, stainless steel and when selecting metal remember metal sizes are limited to "Factory Standard Sizes & Configurations."

Plastic Laminate Cabinets are often in a grade - AWI 400 ( Commercial Grade Custom)
Plastic Laminate may need to be Lab Grade for use in your lab.
Plastic Lab Grade Cabinets can be Classic or Basic Sytle, Factory Built or custom.
Plastic Laminate Lab Cabinets can be Basic Plus - Chemsurf faced.
Plastic Laminate Lab cases can be ChemGuard faced or Traditional laminated Wood Cabinets or wood.

Cabinet Doors
Glass Doors can be Framed or Unframed then Sliding or Hinged Doors.
Aluminum Framed Hinged or Sliding cost less than standard framed doors.
New doors is a way to reface your existing wall cases.
Need a new look - consider new doors on those old cases - Reface or replace just the doors.
Do not think because your material is one type you must add to you lab with that same material.
Mixing can save money and look right if done right

Standard Sizes:

  • Common Size Wall Cabinets described in Width, Height, Depth
  • 12" High W 301212 or W 301224
  • 15" High W 301512 W 331512 W 361512
  • 18" High W 271812 W 301812 W 331812 W 361812
  • 24" High W 242412 W 272412 W 302412 W 332412 W 362412

  • (Single Door Units) (Add L or R for Left or Right Hinged)
  • 30" High W 93012 W 123012 W 153012 W 183012 W 213012 W 2430 12

  • (Two Doors)
  • W 273012 W 303012 W 333012 W 363012
  • W 363012 W 423012 W 483012 (2 Adjustable Shelves)

  • Wall Units 48" High are available
  • Wall Unit Depth can be 16" or 18" or 22" or 24"

  • Shelves on Standards
  • KV Standards and brackets in Alumium as Standard or Colored Epoxy Coated
  • Standard, Heavy Duty or Industrial Grade
  • Electrostatic Painted, Powder-Coated, Epoxy Painted

  • Shelves 3/4" or 1" thick
  • Sizes 8", 10", 12, 14, 16, 18, 21, or 24" in depth
  • Standards are 3', 4', 5', 6' length
  • Standard should not exceed 3' on center

    { Base Units } { Wall Upper Styles } { Worksurfaces } { Fume Hoods} { Equipment } { Lab Furniture } {Contact Us} { Main }